Error codes › Leveling & Stabilization Systems › EQ Systems Auto-Level / Smart-Level › IGNITION ON LED
EQ Systems Auto-Level / Smart-Level error code IGNITION ON LED
The ignition key is in ON (engine run) with the panel powered (pink wire has 12 VDC). On most coaches jack extension is denied in this state; a few applications instead allow extension only with the key on (see the deny-tone entry). EQ treats a correctly working Ignition On light as a safety requirement. Trailer Smart-Level panels have no ignition input.
What to check, and in what order, is in the app. The flow EQ Systems Smart-Level / Auto-Level - panel, pump, jacks and status lights (control circuit) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Basic Trouble Shooting - Smart-Level Control Circuit (R1)EQ Systems (formerly Equalizer Systems)
- Basic Trouble Shooting for Auto-Level - For Systems Using Current Controller/Keypad (Forest River library title: 'Auto Level Model Smart-Level Basic Troubleshooting')EQ Systems (formerly Equalizer Systems)
- EQ Smart-Level Installation/Operation/Warranty Guide for Sprinter/Mercedes Chassis (EQ020R5, Dec 2019)EQ Systems (formerly Equalizer Systems)
Related codes
- LOW VOLTAGE LEDVoltage to the panel (Smart-Level) or controller (New-Platform) has…
- ENGAGE PARK BRAKE LEDThe park-brake input (black wire with yellow trace) is not grounded…
- EXCESS SLOPE LEDShown after an unsuccessful auto-level: the system could not level…
- JACKS DOWN LEDs stay on after ALL RETRACTThe jacks-down light next to each pair of arrows says the jack(s) are…
- JACKS DOWN LEDs come on during travelLoss of fluid pressure in the retract side of the hydraulic circuit…
- Deny tone when extendingThe panel refuses jack extension (manual DOWN or AUTO LEVEL) because…
All Leveling & Stabilization Systems error codes · Look up another code