Error codes › Leveling & Stabilization Systems › EQ Systems Auto-Level / Smart-Level › LOW VOLTAGE LED
EQ Systems Auto-Level / Smart-Level error code LOW VOLTAGE LED
Voltage to the panel (Smart-Level) or controller (New-Platform) has fallen below approximately 10.5 VDC; the pump shuts off. The light stays on until any button is pressed. Some early Smart-Level panels - key/engine-on units - use a 13 VDC threshold instead.
What to check, and in what order, is in the app. The flow EQ Systems Smart-Level / Auto-Level - panel, pump, jacks and status lights (control circuit) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Basic Trouble Shooting - Smart-Level Control Circuit (R1)EQ Systems (formerly Equalizer Systems)
- EQ Smart-Level Installation/Operation/Warranty Guide for Sprinter/Mercedes Chassis (EQ020R5, Dec 2019)EQ Systems (formerly Equalizer Systems)
- Required Maintenance Items for EQ Systems Hydraulic Jacks and Slide SystemsEQ Systems (formerly Equalizer Systems)
Related codes
- ENGAGE PARK BRAKE LEDThe park-brake input (black wire with yellow trace) is not grounded…
- IGNITION ON LEDThe ignition key is in ON (engine run) with the panel powered (pink…
- EXCESS SLOPE LEDShown after an unsuccessful auto-level: the system could not level…
- JACKS DOWN LEDs stay on after ALL RETRACTThe jacks-down light next to each pair of arrows says the jack(s) are…
All Leveling & Stabilization Systems error codes · Look up another code