Error codes › Leveling & Stabilization Systems › EQ Systems Auto-Level / Smart-Level › Deny tone when extending

EQ Systems Auto-Level / Smart-Level error code Deny tone when extending

InformationLeveling & Stabilization SystemsVerified against the manufacturer's manual

The panel refuses jack extension (manual DOWN or AUTO LEVEL) because an interlock is not met: on most coaches the key is ON (extension needs key OFF); on some coaches extension is allowed ONLY with the key on, engine running and at least 13 VDC (e.g. Forest River Georgetown controller 3055 needs key ON and park brake applied); the park-brake input is open; or, on New-Platform keypads 3012/3103 and the 2009 Forest River keypad, the 'anti-twist' protocol is blocking one corner that sits about 3 degrees higher than the rest.

What to check, and in what order, is in the app. The flow EQ Systems Smart-Level / Auto-Level - panel, pump, jacks and status lights (control circuit) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.

Start free trial 14 days free, no card needed

Documented in

Related codes

All Leveling & Stabilization Systems error codes · Look up another code