Error codes › Surge Protection / Electrical Management (EMS) › Southwire Surge Guard (portable LCD) › L1 LOW / L2 LOW (WAS xxV)

Southwire Surge Guard (portable LCD) error code L1 LOW / L2 LOW (WAS xxV)

FaultSurge Protection / Electrical Management (EMS)Verified against the manufacturer's manual

Low voltage: the line voltage dropped below 102 V and the unit turned RV power off. 'WAS xxV' records the voltage it saw (example 'L1 LOW WAS 99V'); L2 appears on the 50A models only. Southwire's guide says the usual cause is an overloaded park grid; the 34930/34950 manual adds 'only partial power at 50 Amp source' and 'no power at source'. Once the voltage recovers the unit restores power after 128 seconds. Trip time: the spec tables in both operating manuals say 7 seconds; troubleshooting guide 506-00022A says below 102 VAC for more than 7 seconds and above 136 VAC for more than 8 seconds. CONFLICT (logged): both operating manuals (505-00152A and 505-00170A) and page 1 of troubleshooting guide 506-00022A give 102 / 136 VAC. Southwire's training manual lists the full-feature portables as Low (<102V) / High (>132V), and the error table on page 2 of 506-00022A prints the limits reversed ('lower voltage to >132V', 'raise voltage to <102V'). The suite uses the operating-manual figures, 102 / 136 VAC.

What to check, and in what order, is in the app. The flow Southwire Surge Guard portable - LCD message to cause (pedestal, coach or unit) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.

Start free trial 14 days free, no card needed

Documented in

Related codes

All Surge Protection / Electrical Management (EMS) error codes · Look up another code