Error codes › Surge Protection / Electrical Management (EMS) › Southwire Surge Guard (portable LCD) › RECEPT OVERHEAT
Southwire Surge Guard (portable LCD) error code RECEPT OVERHEAT
Overheating plug/receptacle: the Surge Guard's receptacle temperature trip has detected an over-temperature at the plug connection. Southwire: disconnect the unit, let it cool completely, and find another power source. Southwire also warns that power cord adapters have been known to cause fires when their amp rating is exceeded.
What to check, and in what order, is in the app. The flow Southwire Surge Guard portable - LCD message to cause (pedestal, coach or unit) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Surge Guard Installation & Operating Instructions, Models 34931 / 34951 (30A / 50A Portable, wireless)Southwire Company, LLC
- Surge Guard Troubleshooting Guide, Model 34930 (30A Portable with LCD Display)Southwire Company, LLC
Related codes
- L1 HIGH / L2 HIGH (WAS xxxV)High voltage: the line voltage went above 136 V and the unit turned…
- L1 LOW / L2 LOW (WAS xxV)Low voltage: the line voltage dropped below 102 V and the unit turned…
- NEUTRIP WAS xxAHigh neutral current trip (50A models 34950 / 34951 only - the spec…
- L1 AMPS WAS xxAOver-current: the current drawn through the Surge Guard exceeded the…
- GND HIGH WAS xxVAbnormal voltage on the ground conductor; 'WAS xxV' records the…
- OPEN NEUTRALOpen neutral on the coach side (LCD table wording). Southwire's…
- FREQ HI DETECTEDLine frequency above 70 Hz (34931 / 34951 only - the 34930 / 34950…
- FREQ LO DETECTEDLine frequency below 54 Hz (34931 / 34951 only - not in the 34930 /…
All Surge Protection / Electrical Management (EMS) error codes · Look up another code