Girard error code MOTOR DIRECTION INCORRECT
The awning retracts when it should extend (and vice versa). Direction on the GC1146C is set during PAIRING, not by any LEFT/RIGHT button or 6-second key combo (those do not exist). To correct it you re-pair the wall switch/handset and finish on the opposite button.
What to check, and in what order, is in the app. The flow Girard GC1146C - Motor Direction Incorrect walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- ccd-0006100.txt
Related codes
- Beeping / Pairing Window ActiveThe GC1146C signals state by BEEPING, not by a blinking green LED. It…
- REMOTE SIGNAL NOT RECEIVEDGC1146C is not responding to its G-Link remote handset or wall…
- MOTOR NOT MOVINGGC1146C is receiving commands but the 12V DC awning motor does not…
- MOTOR RUNS CONTINUOUSLYThe awning motor does not stop at the end of travel. On the Girard…
- CONTINUOUS MODE NOT FUNCTIONINGThe awning is in Step mode (operates only while a button is held)…
- STEP MODE NOT FUNCTIONINGThe awning runs fully on a single press (Continuous mode) when Step…
- No ResponseThe GC1146C motor controller is not receiving power, or the remote is…
- Slow Motor ResponseThe awning motor operates but is sluggish or stalls after a short…
All Awnings (Patio, Window, Slide Topper) error codes · Look up another code