Girard error code STEP MODE NOT FUNCTIONING
The awning runs fully on a single press (Continuous mode) when Step mode is wanted (awning moves only while the button is held, stops on release). On the Girard Solar Station system the mode is toggled by holding IN + OUT together for five (5) seconds (the motor jogs twice); the Solar Station light flashes once to confirm Step mode. There is no STOP+RIGHT 6-second combo and no green controller LED.
What to check, and in what order, is in the app. The flow Girard GG750 Solar Station awning - STEP MODE NOT FUNCTIONING walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- ccd-0007494.txt
Related codes
- MOTOR NOT MOVINGGC1146C is receiving commands but the 12V DC awning motor does not…
- MOTOR RUNS CONTINUOUSLYThe awning motor does not stop at the end of travel. On the Girard…
- MOTOR DIRECTION INCORRECTThe awning retracts when it should extend (and vice versa). Direction…
- CONTINUOUS MODE NOT FUNCTIONINGThe awning is in Step mode (operates only while a button is held)…
- No ResponseThe GC1146C motor controller is not receiving power, or the remote is…
- Slow Motor ResponseThe awning motor operates but is sluggish or stalls after a short…
All Awnings (Patio, Window, Slide Topper) error codes · Look up another code