Girard error code CONTINUOUS MODE NOT FUNCTIONING
The awning is in Step mode (operates only while a button is held) when Continuous mode is wanted (one press runs the awning fully in/out). On the Girard Solar Station system the mode is toggled by holding IN + OUT together for five (5) seconds (the motor jogs twice); the Solar Station light flashes to confirm - three flashes = Continuous mode. There is no STOP+RIGHT 6-second combo and no green controller LED.
What to check, and in what order, is in the app. The flow Girard GG750 Solar Station awning - CONTINUOUS MODE NOT FUNCTIONING walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- ccd-0007494.txt
Related codes
- REMOTE SIGNAL NOT RECEIVEDGC1146C is not responding to its G-Link remote handset or wall…
- MOTOR NOT MOVINGGC1146C is receiving commands but the 12V DC awning motor does not…
- MOTOR RUNS CONTINUOUSLYThe awning motor does not stop at the end of travel. On the Girard…
- MOTOR DIRECTION INCORRECTThe awning retracts when it should extend (and vice versa). Direction…
- STEP MODE NOT FUNCTIONINGThe awning runs fully on a single press (Continuous mode) when Step…
- No ResponseThe GC1146C motor controller is not receiving power, or the remote is…
- Slow Motor ResponseThe awning motor operates but is sluggish or stalls after a short…
All Awnings (Patio, Window, Slide Topper) error codes · Look up another code