RV Safe error code No LEDs lit, no sound
Power Off state: the alarm has no 12 VDC supply. Both manuals: if no LEDs are on, the alarm is powered off - apply power to resume normal operation. The alarm will not operate nor sound if the power source is low or disconnected.
What to check, and in what order, is in the app. The flow RV Safe RVCOLP / RVLP - alarm, LED and self-test signal decoder walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- RV Safe CO & Propane Gas Alarm RVCOLP-2 / Propane Gas Alarm RVLP-2 Owner's Manual, REV 06.01.22 (90-5012-20)RV Safe LLC
- RV Safe CO & Propane Gas Alarm RVCOLP-2 / RVCOLP-3 and Propane Gas Alarm RVLP-2 / RVLP-3 Owner's Manual, REV 12.05.19 (90-4074-00)RV Safe LLC
Related codes
- Green LED on, red LED off, no soundNormal operation: the alarm is functioning normally and no CO or…
- Green LED flashing, red off, no sound (first 3 minutes after power-up)Warm-Up state (REV 06.01.22 manual only): the green LED flashes for…
- Red LED on/flashing + 4 chirps then constant beeps, right after pressing Silence/TestSelf Test PASSED: pressing Silence/Test in normal operation tests the…
- Red LED flashing + 4 rapid chirps, 4 s pause, repeatingCO ALARM (RVCOLP models only): CO exceeded the detection threshold…
- Red LED on + constant beepsPROPANE ALARM: propane at the sensor exceeded the alarm threshold for…