Error codes › Leveling & Stabilization Systems › Lippert Ground Control 3.0 (One-Touch) › EXCESSIVE ANGLE (One-Touch)
Lippert Ground Control 3.0 (One-Touch) error code EXCESSIVE ANGLE (One-Touch)
OneControl EXCESSIVE ANGLE during MANUAL operation — user has manually moved jacks to a position that exceeds safe angle.
What to check, and in what order, is in the app. The flow GC 3.0 — rear jacks won't move individually but Auto Level works (Twist Prevention) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- ccd-0001519.txt
Related codes
- LED Blinking RedAuto Leveling Control Touch Pad LED is blinking red — a fault is…
- BAD CALIBRATION (One-Touch)OneControl Touch Panel shows BAD CALIBRATION - the trailer's zero…
- OUT OF STROKE (One-Touch)OneControl shows OUT OF STROKE — controller is loose/unsecured OR the…
- AUTO LEVEL FAIL (One-Touch)OneControl AUTO LEVEL FAIL - controller is unsecured OR battery…
- HALL POWER SHORT (One-Touch)Short circuit detected on one or more of the jack hall-effect power…
All Leveling & Stabilization Systems error codes · Look up another code