Error codes › Leveling & Stabilization Systems › Lippert Ground Control 3.0 (One-Touch) › LF JACK / RF JACK / LM JACK / RM JACK / LR JACK / RR JACK
Lippert Ground Control 3.0 (One-Touch) error code LF JACK / RF JACK / LM JACK / RM JACK / LR JACK / RR JACK
Error at specific jack (left front, right front, left middle, right middle, left rear, right rear). Hall signal issue (open, short, malfunction, loss of communication) or circuit problem.
What to check, and in what order, is in the app. The flow Ground Control LCD: Special Jack error (LF/RF/LM/RM/LR/RR) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 7 days free, no card neededDocumented in
- Lippert Ground Control (5th Wheel) 4-Point and 6-Point OneControl Touch Panel Owner's Manual (Rev 11.20.24) - OneControl Touch Panel/App Error Codes (p15) + Special Jack Error Codes (p16)Lippert Components
- ccd-0001519.txtLippert
Related codes
- OUT OF STROKE (One-Touch)OneControl shows OUT OF STROKE — controller is loose/unsecured OR the…
- AUTO LEVEL FAIL (One-Touch)OneControl AUTO LEVEL FAIL - controller is unsecured OR battery…
- EXCESSIVE ANGLE (One-Touch)OneControl EXCESSIVE ANGLE during MANUAL operation — user has…
- HALL POWER SHORT (One-Touch)Short circuit detected on one or more of the jack hall-effect power…
All Leveling & Stabilization Systems error codes · Look up another code