Lithionics error code Low Voltage State
App status code: battery voltage is very low (below 10.8V; any cell at 2.7V) - Low Voltage Cutoff. Discharge is disabled but charging is still allowed. Charge immediately.
What to check, and in what order, is in the app. A step-by-step flow walks this code with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- GTX12V320A-E2107-CS200-UL User Guide RevC (NeverDie Compact Series 200 internal BMS)Lithionics Battery
Related codes
- Cell Temp High/LowApp status code: internal cell temperature is outside the operating…
- NeverDie ReserveApp status code: the battery is in the NeverDie Reserve state - the…
- BMS Temp HighApp status code: the BMS board itself is too hot, typically from…
- Reserve RangeApp status code: battery voltage is low (below 12.0V and/or 10% SOC)…
- Battery OverloadApp status code: charge or discharge current is over 250A; power is…
- Power Off StateApp status code: the battery was turned off by the power button…
- Overcurrent StateApp status code: discharge current exceeded 600A and power is now…
- Short Circuit ProtectionApp status code: discharge current exceeded 1200A and the BMS…
All Electrical (12V / 120V / Converter / Inverter) error codes · Look up another code