Error codes › Electrical (12V / 120V / Converter / Inverter) › Lithionics › Short Circuit Protection
Lithionics error code Short Circuit Protection
App status code: discharge current exceeded 1200A and the BMS disconnected immediately. A lithium battery can hold its voltage into a short and weld connections or damage the BMS - the external fuse or UL breaker, not the BMS, is the real short-circuit protection.
What to check, and in what order, is in the app. A step-by-step flow walks this code with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- GTX12V320A-E2107-CS200-UL User Guide RevC (NeverDie Compact Series 200 internal BMS)Lithionics Battery
Related codes
- Low Voltage StateApp status code: battery voltage is very low (below 10.8V; any cell…
- Battery OverloadApp status code: charge or discharge current is over 250A; power is…
- Power Off StateApp status code: the battery was turned off by the power button…
- Overcurrent StateApp status code: discharge current exceeded 600A and power is now…
- Cell Over-VoltageApp status code: one cell's voltage is too high (cell-level HVC…
- Cell Under-VoltageApp status code: one cell's voltage is too low (cell-level trigger …
- BMS faultApp status code: a BMS fault is present (internal BMS condition…
- Cell 1 / 2 / 3 / 4 BalancingApp status code: the named cell is balancing (end-of-charge…
All Electrical (12V / 120V / Converter / Inverter) error codes · Look up another code