Lithionics error code BMS Temp High
App status code: the BMS board itself is too hot, typically from sustained high charge or discharge current. Above 179.6 degF (82 degC) the BMS disables charge and discharge until it cools below 158 degF (70 degC).
What to check, and in what order, is in the app. A step-by-step flow walks this code with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- GTX12V320A-E2107-CS200-UL User Guide RevC (NeverDie Compact Series 200 internal BMS)Lithionics Battery
Related codes
- Status light: Rapid blinkGTX internal-BMS status light rapid blink: FAULT ALARM - a BMS…
- High Voltage StateApp status code: battery voltage too high, typically 14.8V (3.70V per…
- Cell Temp High/LowApp status code: internal cell temperature is outside the operating…
- NeverDie ReserveApp status code: the battery is in the NeverDie Reserve state - the…
- Reserve RangeApp status code: battery voltage is low (below 12.0V and/or 10% SOC)…
- Low Voltage StateApp status code: battery voltage is very low (below 10.8V; any cell…
- Battery OverloadApp status code: charge or discharge current is over 250A; power is…
- Power Off StateApp status code: the battery was turned off by the power button…
All Electrical (12V / 120V / Converter / Inverter) error codes · Look up another code