Lithionics error code High Voltage State
App status code: battery voltage too high, typically 14.8V (3.70V per cell). The BMS disables charge current (High Voltage Cutoff) and re-enables it on its own once charge current is removed and the voltage settles.
What to check, and in what order, is in the app. A step-by-step flow walks this code with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- GTX12V320A-E2107-CS200-UL User Guide RevC (NeverDie Compact Series 200 internal BMS)Lithionics Battery
Related codes
- Status light: Solid OFFGTX internal-BMS power button status light off: battery power is off…
- Status light: Slow blinkGTX internal-BMS status light slow blink: the battery is CHARGING.…
- Status light: Short blinkGTX internal-BMS status light short blink: LOW BATTERY. The pack is…
- Status light: Rapid blinkGTX internal-BMS status light rapid blink: FAULT ALARM - a BMS…
- Cell Temp High/LowApp status code: internal cell temperature is outside the operating…
- NeverDie ReserveApp status code: the battery is in the NeverDie Reserve state - the…
- BMS Temp HighApp status code: the BMS board itself is too hot, typically from…
- Reserve RangeApp status code: battery voltage is low (below 12.0V and/or 10% SOC)…
All Electrical (12V / 120V / Converter / Inverter) error codes · Look up another code