Renogy Rover error code E6
Controller over-temperature - the heat-sink temperature is too high. The Rover reduces charge current above 65 degC and shuts down above 85 degC.
What to check, and in what order, is in the app. The flow Renogy Rover MPPT - error code lookup walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Renogy Rover 20A/30A/40A MPPT Solar Charge Controller User Manual (Version 1.3)
Related codes
- E2Battery over-voltage - battery voltage is above the safe limit…
- E3Battery under-voltage - battery voltage is below the configured…
- E4Load short circuit - the load output is shorted; the controller has…
- E5Load overloaded - load current exceeded 1.05x the rating; the…
- E8PV input over-current - solar input current exceeds the limit…
- E10PV over-voltage - PV input voltage exceeds the 100 VDC maximum; PV…