Renogy Rover error code E5
Load overloaded - load current exceeded 1.05x the rating; the controller disconnected the load.
What to check, and in what order, is in the app. The flow Renogy Rover MPPT - error code lookup walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Renogy Rover 20A/30A/40A MPPT Solar Charge Controller User Manual (Version 1.3)
Related codes
- E1Battery over-discharged - the controller's low-voltage disconnect…
- E2Battery over-voltage - battery voltage is above the safe limit…
- E3Battery under-voltage - battery voltage is below the configured…
- E4Load short circuit - the load output is shorted; the controller has…
- E6Controller over-temperature - the heat-sink temperature is too high.…
- E8PV input over-current - solar input current exceeds the limit…
- E10PV over-voltage - PV input voltage exceeds the 100 VDC maximum; PV…