Norcold N15DCX/N20DCX (1520cu) error code E2
Freezer compartment thermistor not cycling properly. Same logic as E1 but for the freezer thermistor.
What to check, and in what order, is in the app. The flow Norcold 1520cu (N15DCX / N20DCX) — Compressor Refrigerator Diagnostic walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Norcold N15DCX/N20DCX Service Manual 641052C Rev (Thetford) [on disk, fetched 2026-06-08]
- Norcold DCX Service Docs
- Norcold N15DCX/N20DCX 1520cu Service Docs
- Secop BD35F/BD50F Service Manual
Related codes
- 4 flashes (compressor self-test)Minimum Compressor Motor Speed Error. The motor cannot maintain the…
- 5 flashes (compressor self-test)Thermal Cut-Out of Compressor Power Module. The compressor power…
- 6 flashes (compressor self-test)Compressor Power Module Hardware Failure. (Source manual: Test K…
- E1Fresh food compartment thermistor not cycling properly. The…
- E3Voltage outside the cut-out setting. The user-interface cut-out range…
- E4Fresh food compartment door has been open for more than 2 minutes.…
- E5Voltage too low. Distinct from E3 in that E5 indicates voltage below…
- E6Ambient thermistor not cycling properly. Same logic as E1/E2 but for…