Norcold 1210T error code FL --
Flame sensed at burner when gas is supposed to be off
What to check, and in what order, is in the app. The flow Norcold 1210T — error code / symptom diagnostic walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Norcold 1200/1210 Series Service Manual (Publication 630613B, 08-10-07)Norcold
Related codes
- dc HIDC voltage above 15.4 V at the power board for >25 seconds
- no ACAC mode selected but input voltage below 85 V for >25 seconds
- no FLBurner failed to light or relight within the 30-second…
- L1 oPHigh-temperature limit switch open — boiler exceeded 378 °F
- drDoor sensed ajar or open for more than 2 minutes
- Blank displayNo display segments, refrigerator does not turn on
- Flashing temp setting (thermistor)Temperature setting flashes — thermistor disconnected/open OR…
- Alternating display + alarm (extended)Alternating display + alarm pattern from the 1210T power board. Three…