MTI Safe-T-Alert 85 Series error code Flashing red Gas LED + constant beeping
PROPANE GAS ALARM (85 series): the red Gas LED flashes and the alarm beeps continuously whenever a dangerous level of propane is detected (gas alarm trigger less than 25% of the LEL, 8-second confirmation delay). It continues until Test/Mute is pressed; the Gas LED keeps flashing until the gas clears, or the gas alarm reactivates in approximately 5 minutes if gas is still present. In a simultaneous CO + gas alarm the gas alarm takes priority. Immediate action required.
What to check, and in what order, is in the app. The flow MTI Safe-T-Alert 20/25/30/40/45/62/65/85 series - alarm and LED signal decoder walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Safe-T-Alert Model 85-741 Combination Carbon Monoxide and Gas Alarm User's Manual (85RV042021-1, 2021)MTI Industries, Inc. (Safe-T-Alert)
Related codes
- Steady green LED, no soundNormal operation (85 series combination CO/propane alarm): both…
- Flashing green LED, no sound (warm-up, about 10 min)Warm-up (85 series): each time the unit is first powered up the CO…
- Steady red CO LED + 4 beeps, 5 s silence (repeating)CO ALARM (85 series): the red CO LED flashes and the alarm sounds 4…
- Alternating red/green LED + 1 beep every 15-30 s (Gas LED off)MALFUNCTION / SERVICE SIGNAL (85 series): an internal fault was…
- Red-red-green-green flashing LED + beep every 25-30 sEND OF LIFE (85 series): the sensor's 5-year service life has ended…
- Green operational LED off (dark, no sound)No power / no operation (85 series). Troubleshooting causes: bad wire…