Error codes › LP / Propane System › MTI Safe-T-Alert 85 Series › Flashing green LED, no sound (warm-up, about 10 min)
MTI Safe-T-Alert 85 Series error code Flashing green LED, no sound (warm-up, about 10 min)
Warm-up (85 series): each time the unit is first powered up the CO sensor needs a ten (10) minute warm-up to clean the sensor element and stabilize; the GREEN LED flashes on and off and the unit cannot enter alarm. The gas sensor's warm-up is approximately 1 minute, after which it can detect LP gas.
What to check, and in what order, is in the app. The flow MTI Safe-T-Alert 20/25/30/40/45/62/65/85 series - alarm and LED signal decoder walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Safe-T-Alert Model 85-741 Combination Carbon Monoxide and Gas Alarm User's Manual (85RV042021-1, 2021)MTI Industries, Inc. (Safe-T-Alert)
Related codes
- Steady green LED, no soundNormal operation (85 series combination CO/propane alarm): both…
- Steady red CO LED + 4 beeps, 5 s silence (repeating)CO ALARM (85 series): the red CO LED flashes and the alarm sounds 4…
- Flashing red Gas LED + constant beepingPROPANE GAS ALARM (85 series): the red Gas LED flashes and the alarm…
- Alternating red/green LED + 1 beep every 15-30 s (Gas LED off)MALFUNCTION / SERVICE SIGNAL (85 series): an internal fault was…
- Red-red-green-green flashing LED + beep every 25-30 sEND OF LIFE (85 series): the sensor's 5-year service life has ended…