Lippert Ground Control LCD error code Feature Disabled
One of three conditions: (1) Front of 5th wheel below level when trying to initiate Hitch Recognition; (2) touchpad not power-cycled between consecutive leveling operations; (3) zero point not set
What to check, and in what order, is in the app. The flow Ground Control LCD manual override (retract jacks without power) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- ccd_0001517.txt
Related codes
- Low VoltageBattery voltage dropped below 10.8 V DC during operation
- Excess AngleExcessive angle reached during AUTO operation, OR controller not…
- Excessive AngleExcessive angle reached during MANUAL operation. The code self-clears…
- Out Of StrokeA jack has reached its maximum stroke length and is unable to lift…
- External SensorBad connection or wiring from the controller to the rear remote sensor
- Jack Time OutTime limit exceeded for the requested auto operation
- Auto Level FailCould not auto-level: ground is too uneven, OR zero point was set…
All Leveling & Stabilization Systems error codes · Look up another code