Lippert Ground Control LCD error code Excessive Angle
Excessive angle reached during MANUAL operation. The code self-clears once the jacks are reset to a more level state (no need to press OK).
What to check, and in what order, is in the app. The flow Ground Control LCD: Special Jack error (LF/RF/LM/RM/LR/RR) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Lippert Ground Control (5th Wheel) 4-Point and 6-Point OneControl Touch Panel Owner's Manual (Rev 11.20.24) - OneControl Touch Panel/App Error Codes (p15) + Special Jack Error Codes (p16)Lippert Components
Related codes
- Low VoltageBattery voltage dropped below 10.8 V DC during operation
- Excess AngleExcessive angle reached during AUTO operation, OR controller not…
- Feature DisabledOne of three conditions: (1) Front of 5th wheel below level when…
- Out Of StrokeA jack has reached its maximum stroke length and is unable to lift…
- External SensorBad connection or wiring from the controller to the rear remote sensor
- Jack Time OutTime limit exceeded for the requested auto operation
All Leveling & Stabilization Systems error codes · Look up another code