HWH error code TRAVEL MODE
Normal status - the green TRAVEL MODE light means the leveling system is in travel mode: the jacks are retracted and the coach is ready to travel. This is not a fault.
What to check, and in what order, is in the app. The flow HWH 625 / 625S / 725 — leveling code & indicator lookup walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- HWH 725 Series Leveling System Service Manual (ML48380)HWH Corporation
Related codes
- EXCESS SLOPEAuto-leveling could not level the coach: one or two jacks fully…
- NOT IN PARKPark-brake interlock not satisfied — the park-brake signal isn't…
- RESET SWITCH ONPump run-time lockout - the processor shut the pump off after run…
- LED OFF 15 16Control-box pump-relay LEDs 15 (PUMP COIL) and/or 16 (PUMP OUTPUT)…
- LED OFF 33Control-box LED 33 (green, 50-psi pressure-switch input) not lit…
- LED OFF 31LED 31 not illuminating; the 3000# (3,000 lb) manifold pressure…
- BLOWN FUSE F3 F8Fuse F3 (15A, Right Front solenoid valve - LED 6) or F8 (5A, Pump…
All Leveling & Stabilization Systems error codes · Look up another code