HWH error code RESET SWITCH ON
Pump run-time lockout - the processor shut the pump off after run time was exceeded; the lighted RESET switch is lit and the pump stays disabled until it is reset.
What to check, and in what order, is in the app. The flow HWH 625 / 625S / 725 — leveling code & indicator lookup walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- HWH Leveling System Operator's Manual (ML46430)HWH Corporation
Related codes
- EXCESS SLOPEAuto-leveling could not level the coach: one or two jacks fully…
- NOT IN PARKPark-brake interlock not satisfied — the park-brake signal isn't…
- TRAVEL MODENormal status - the green TRAVEL MODE light means the leveling system…
- LED OFF 15 16Control-box pump-relay LEDs 15 (PUMP COIL) and/or 16 (PUMP OUTPUT)…
- LED OFF 33Control-box LED 33 (green, 50-psi pressure-switch input) not lit…
- LED OFF 31LED 31 not illuminating; the 3000# (3,000 lb) manifold pressure…
All Leveling & Stabilization Systems error codes · Look up another code