Magnum error code No Inverter Comm
No Inverter Comm - the remote is not receiving any communication data from the inverter via the Magnum Network (remote-to-inverter communication lost).
What to check, and in what order, is in the app. The flow Magnum: No Output Power, Inverter LED OFF walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Magnum_ME-RC_Remote_Owners_Manual_64-0003-H_V2.9.pdf
Related codes
- AC OverloadOver-current. AC load draw exceeds inverter rating.
- High Volts ACHigh Volts AC - a very high AC input voltage (>150 VAC) was detected…
- Stuck RelayStuck relay — transfer switch relay welded or failed.
- Internal Charger1Charger fault — charger section internal fault.
- AC BackfeedAC voltage from an external AC source was detected on the inverter's…
- Breaker TrippedThe AC input breaker on the inverter/charger opened due to excess…
- Dead Battery ChargeThe unit is trying to enter Charge mode but detected a very…
- FET OverloadThe inverter/charger shut down because the internal FET temperature…