Magnum error code Breaker Tripped
The AC input breaker on the inverter/charger opened due to excess current flow through the inverter to the AC loads.
What to check, and in what order, is in the app. The flow Magnum: No Output Power, Inverter LED OFF walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Magnum_ME-RC_Remote_Owners_Manual_64-0003-H_V2.9.pdf
Related codes
- Stuck RelayStuck relay — transfer switch relay welded or failed.
- Internal Charger1Charger fault — charger section internal fault.
- No Inverter CommNo Inverter Comm - the remote is not receiving any communication data…
- AC BackfeedAC voltage from an external AC source was detected on the inverter's…
- Dead Battery ChargeThe unit is trying to enter Charge mode but detected a very…
- FET OverloadThe inverter/charger shut down because the internal FET temperature…
- High Batt TempThe inverter/charger shut down because the Battery Temperature Sensor…
- Internal Bridge1Internal fault: the FET bridge shut down after inverting because the…