Magnum error code FET Overload
The inverter/charger shut down because the internal FET temperature rose abnormally fast; a manual restart is required after the FETs cool.
What to check, and in what order, is in the app. The flow Magnum: No Output Power, Inverter LED OFF walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Magnum_ME-RC_Remote_Owners_Manual_64-0003-H_V2.9.pdf
Related codes
- No Inverter CommNo Inverter Comm - the remote is not receiving any communication data…
- AC BackfeedAC voltage from an external AC source was detected on the inverter's…
- Breaker TrippedThe AC input breaker on the inverter/charger opened due to excess…
- Dead Battery ChargeThe unit is trying to enter Charge mode but detected a very…
- High Batt TempThe inverter/charger shut down because the Battery Temperature Sensor…
- Internal Bridge1Internal fault: the FET bridge shut down after inverting because the…
- Internal NTC1Internal fault: the internal NTC temperature sensor detected a very…
- Internal Relay1The internal AC transfer relay is not closed while the unit is…