RVMP Flex Power error code Overload (light on, Ready off)
Inverter reports electrical overload condition. During normal operation the Overload light is OFF and the Ready light is ON. If Ready never comes on and Overload stays on, either there's a real overload (high-draw appliances) or the inverter has failed.
What to check, and in what order, is in the app. The flow RVMP — starts and runs but no 120 V output walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- RVMP_FlexPower_4000i_5500i_Service.txt
Related codes
- Low Oil (light on)The oil-level float switch has tripped and is inhibiting start: oil…
- Low Oil (light off, but generator won't start)Low Oil indicator is unlit AND the generator will not start. The…
- No Ready light, no 120V outputEngine starts and runs but the inverter never produces clean AC…
- No throttle response (idle or load)Engine runs but the throttle stepper motor never moves — no small…
- Rough running or 'hunting' (no load)Engine RPMs swing rapidly up and down when the AC breaker is OFF (no…
- Runs a few minutes then shuts downGenerator starts and runs normally for 5-10 minutes then shuts down.…