RVMP Flex Power error code No Ready light, no 120V output
Engine starts and runs but the inverter never produces clean AC output. Digital display shows 0 V output; green Ready light stays off.
What to check, and in what order, is in the app. The flow RVMP — starts and runs but no 120 V output walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- RVMP_FlexPower_4000i_5500i_Service.txt
Related codes
- Low Oil (light on)The oil-level float switch has tripped and is inhibiting start: oil…
- Low Oil (light off, but generator won't start)Low Oil indicator is unlit AND the generator will not start. The…
- Overload (light on, Ready off)Inverter reports electrical overload condition. During normal…
- No throttle response (idle or load)Engine runs but the throttle stepper motor never moves — no small…
- Rough running or 'hunting' (no load)Engine RPMs swing rapidly up and down when the AC breaker is OFF (no…
- Runs a few minutes then shuts downGenerator starts and runs normally for 5-10 minutes then shuts down.…
- Completely dead (no lights at all)No response on START button, no lights on the control panel. Most…