Girard error code No Power / No Beep on Power-Up
GC1146C 12V DC motor control module is not powered. On power-up the GC1146C beeps ONCE; if there is no beep and the awning will not operate, suspect a lost 12V DC supply on the thick RED/BLACK input wires (the module's input power supply, fed from the vehicle power distribution panel). NOTE: the GC1146C has NO green status LED - the only LED output is the awning light strip on the thin RED/BLACK wires; feedback that the module is alive is the beep.
What to check, and in what order, is in the app. The flow Girard GC1146C - No Power / No Beep on Power-Up walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- ccd-0006100.txt
Related codes
- No Response to Wall Switch (IN/OUT/STOP)GC1146C is powered (beeps once on power-up) but the awning does not…
- Beeping / Pairing Window ActiveThe GC1146C signals state by BEEPING, not by a blinking green LED. It…
- REMOTE SIGNAL NOT RECEIVEDGC1146C is not responding to its G-Link remote handset or wall…
- MOTOR NOT MOVINGGC1146C is receiving commands but the 12V DC awning motor does not…
All Awnings (Patio, Window, Slide Topper) error codes · Look up another code