Go Power error code E6
Over-temperature inside controller -- internal/heatsink temperature too high
What to check, and in what order, is in the app. The flow Go Power Solar Controller — Entry Diagnostic walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Go Power GP-MPPT-PRO-40 Manual (82803)Go Power
Related codes
- E2System over-voltage -- battery-bank voltage above the safe upper limit
- E3Battery under-voltage warning -- battery voltage below the…
- E4Load short circuit on the controller's LOAD output
- E5Load overloaded -- LOAD-terminal draw exceeds the controller's rating
- E7Photovoltaic component overloaded -- PV input exceeds the…
- E8Photovoltaic component over-voltage -- PV input above the…
- E9Photovoltaic component reversely connected -- solar + / - reversed at…
- Battery Over-Temperature (>65 C)Battery temperature above 65 degC (LCD 'Battery temperature over…