Norcold N6XX/N8XX error code n / no co
No cooling detected by the controls. Power board monitors cooling-system temperature drop during operation; if heat is applied but no cooling occurs, this fault is set and ALL heat energy sources are locked out on the second consecutive occurrence.
What to check, and in what order, is in the app. The flow Norcold N6XX/N8XX — dc LO or dc HI fault code walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Norcold_1200_1210_Service_Manual_630613B.txtNorcold
- Norcold Service Bulletin TNCSTP 120803-B - Resetting the No Cooling Fault CodeNorcold
Related codes
- AC HIAC voltage high — power board measured above 132 VAC at the AC input.
- AC LOAC voltage low — power board measured below 108 VAC at the AC input.
- P / AC HEAC heater failed open. Power board detects open circuit in the 120…
- d / drFresh food compartment door reported open for more than 2 minutes.…
- 10 sec flashesThe refrigerator has fallen back to its Back Up Operating System. Per…