Norcold N6XX/N8XX error code H / AC rE
AC relay stuck closed. Power board detects the AC heater relay K2 is not opening when commanded — the heater could run continuously. Not field-repairable.
What to check, and in what order, is in the app. The flow Norcold N6XX/N8XX — dc LO or dc HI fault code walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Norcold N6xx/N8xx Series Service Manual [on disk, 19-myrvworks]
- Norcold N6XX/N8XX/N1210T Service Manual
- Norcold Tech Support 800-543-1219
- Norcold Chapter 11 (Nov 2025) — parts supply uncertain past 2026
Related codes
- dc HIDC voltage high — power board sees input above 15.4 VDC. Most often…
- dc rEDC relay stuck closed (N64X.3/N84X.3 3-way models only). Power board…
- dc HEDC heater failed open (N64X.3/N84X.3 3-way models only). Power board…
- A / no ACNo AC power available to the refrigerator. Controls cannot start AUTO…
- AC HIAC voltage high — power board measured above 132 VAC at the AC input.
- AC LOAC voltage low — power board measured below 108 VAC at the AC input.
- P / AC HEAC heater failed open. Power board detects open circuit in the 120…
- d / drFresh food compartment door reported open for more than 2 minutes.…