Error codes › Leveling & Stabilization Systems › Lippert Auto Level Pro › LF JACK / RF JACK / LM JACK / RM JACK / LR JACK / RR JACK
Lippert Auto Level Pro error code LF JACK / RF JACK / LM JACK / RM JACK / LR JACK / RR JACK
Error at specific jack (left front, right front, left middle, right middle, left rear, right rear). Hall signal issue (open, short, malfunction, loss of communication) or circuit problem.
What to check, and in what order, is in the app. The flow Auto Level Pro — "Open Circuit Detected on Jack" fault walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Lippert Ground Control (5th Wheel) 4-Point and 6-Point OneControl Touch Panel Owner's Manual (Rev 11.20.24) - OneControl Touch Panel/App Error Codes (p15) + Special Jack Error Codes (p16)Lippert Components
Related codes
- Excess Angle DetectedRV exceeded the maximum allowed body angle during auto operation.
- Auto Operation InterruptedAnother interface (mobile app, second touchscreen) stopped the auto…
- Action Temporarily UnavailableAction is temporarily blocked.
- HALL POWER SHORTShort circuit detected in one of the hall effect circuits (jack…
All Leveling & Stabilization Systems error codes · Look up another code