Splendide 2100XC error code F09
Setup file error - EEPROM not programmed or damaged (most common after a board swap)
What to check, and in what order, is in the app. The flow Splendide F-code interpretation walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Splendide 2100XC/7100XC TRAINMANXC Service Manual - Fault Codes (master list + Testing Procedure Chart, printed pp.51-53)Westland Sales / Splendide
- Splendide 2100XC Service Manual
- Splendide Combomatic Service Manual
- Splendide ARxx Series Service Manual
Related codes
- F05Empty pressure-switch level not reached - drain pump blocked or…
- F06Selector binary code not found
- F07No absorption of wash heater (heater not drawing current when…
- F08NA/NC contact of wash heater relay welded
- F10No signal of simultaneous empty and full
- F11Drain pump not supplied - no current at the pump
- F12No communication between Control Panel Board and Main Board
- F13Drying NTC open / shorted, or fan motor blocked
All Laundry (Washer/Dryer) error codes · Look up another code