Magnum CSW Series error code E05
Battery low WARNING alarm - the unit will shut down shortly (E01 follows if the voltage keeps falling). Both code tables print the warning point as 11.2 VDC.
What to check, and in what order, is in the app. The flow Magnum CSW inverter (CSW2012-X / -HX, CSW1012 / CSW2012, CSW412) - no AC output or E-code walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- CSW2012-X Owner's ManualDMX Power LLC (Magnum-Dimensions; formerly Sensata Technologies)
- CSW Series (12-volt models) Owner's Manual - CSW412 / CSW1012 / CSW2012DMX Power LLC (Magnum-Dimensions; formerly Sensata Technologies)
Related codes
- E01Battery (DC input) voltage too low - under-voltage SHUTDOWN. Factory…
- E02Battery (DC input) voltage too high - the unit has shut down.…
- E03AC output overload or short circuit - the unit has shut down.
- E04Internal temperature too high - the unit has shut down (thermal…
- E06AC output load is large and close to the overload shutdown limit…
- E07Internal temperature high and close to the thermal shutdown limit…
- E12CSW2012-X / CSW2012-HX only: internal transfer switch temperature is…