Magnum CSW Series error code E03
AC output overload or short circuit - the unit has shut down.
What to check, and in what order, is in the app. The flow Magnum CSW inverter (CSW2012-X / -HX, CSW1012 / CSW2012, CSW412) - no AC output or E-code walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- CSW2012-X Owner's ManualDMX Power LLC (Magnum-Dimensions; formerly Sensata Technologies)
- CSW Series (12-volt models) Owner's Manual - CSW412 / CSW1012 / CSW2012DMX Power LLC (Magnum-Dimensions; formerly Sensata Technologies)
Related codes
- E01Battery (DC input) voltage too low - under-voltage SHUTDOWN. Factory…
- E02Battery (DC input) voltage too high - the unit has shut down.…
- E04Internal temperature too high - the unit has shut down (thermal…
- E05Battery low WARNING alarm - the unit will shut down shortly (E01…
- E06AC output load is large and close to the overload shutdown limit…
- E07Internal temperature high and close to the thermal shutdown limit…