Error codes › Diesel Air Heaters › Eberspacher EasyStart Pro control unit (controller display - not a heater code) › 2
Eberspacher EasyStart Pro control unit (controller display - not a heater code) error code 2
Int. Temp. Sensor defective - the temperature sensor inside the control unit is defective (control-unit message).
What to check, and in what order, is in the app. The flow Eberspacher EasyStart Pro - what the controller is showing (control-unit codes 1-9 + heater messages) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Eberspacher EasyStart Pro Operating Instructions 22.1000.35.2204.0A (EN, 07.2021)Eberspacher Climate Control Systems GmbH
Related codes
- Overheat. Heater locked.Overheating detected and the heater is interlocked (locked out) for…
- Restricted OperationEmergency running: a heater fault exists but restricted operation…
- Heater ON for 10 Min.Maintenance prompt, not a fault: after four months without operation…
- 1Ext. Temp. Sensor defective - the external temperature sensor…
- 3Rotary Knob jammed - the operating button (rotary knob) is blocked…
- 4Pushbutton jammed - the BACK button is blocked (control-unit message).
- 7Timer mode not allowed - timer mode is not permitted in the…
- 8Operation not supported - the heater is in auxiliary heating mode via…