RecPro RP-AC48V (Houghton AEOLUS) error code 9E
Compressor phase-current protection (software) - measured phase current exceeded the firmware limit.
What to check, and in what order, is in the app. A step-by-step flow walks this code with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- RecPro_RP-AC48V-H3400_AEOLUS_H3400_Manual.txt
Related codes
- 5EDC bus over-voltage protection - the 48 V supply exceeded the safe…
- 6EDC bus under-voltage protection - the 48 V supply dropped below the…
- 7ECompressor stall protection - the inverter detected the compressor…
- 8ECompressor locked-rotor protection - the inverter detected a…
- AECompressor phase-current protection (hardware) - the drive hardware…
- bECommunication fault between the electric control board and the…
- dFDefrost in progress - NORMAL heat-pump operation (not a fault). In…
- LoLow-voltage warning - the 48 V supply is low (advisory, shown before…
All Air Conditioning (Rooftop) error codes · Look up another code