GE Profile PR60PTLWBU error code E4
Water inlet temperature sensor fault — damaged sensor or a broken/cut/shorted wire. Service required.
What to check, and in what order, is in the app. The flow GE Profile PR60PTLWBU tankless — error code diagnostic walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- rv-tech-resources/38-ge-profile-rv-wh/GE_PR60PTLWBU_Error_Code_Chart.md
- rv-tech-resources/38-ge-profile-rv-wh/GE_PR60PTLWBU_OwnersManual_49-6000325_Rev3.pdf
- GE Appliances Owner's Manual, Water Heater Model PR60PTLWBU, doc 49-6000325 Rev. 3 (09-25), text-layer PDF
Related codes
- E0Water outlet temperature sensor fault — damaged sensor or a…
- E1Flame sense fault — burner did not ignite or flame not sensed.…
- E2Before ignition, a flame signal was detected (system fault). Service…
- E3Thermal cutout fault (system fault). Flow hot water through a faucet…
- E5Air pressure switch or fan motor fault — exhaust blockage (clear the…
- E6Outlet temperature-limit protection — outlet water exceeded 65°C…
- E7Gas solenoid valve fault (system fault). Service required.
- E8Fan speed exceeds limit — fan speed exceeded its limit for 5 seconds.…
All Water Heater — Tankless error codes · Look up another code