Furrion F2GWH (tankless) error code E1
Ignition failure or accidental flame off during ignition - after two failed trials the control locks out. Most common causes: lack of gas, faulty igniter or igniter connections, wrong igniter-to-burner distance, dirt between igniter and burner, low gas inlet pressure.
What to check, and in what order, is in the app. The flow Furrion F2GWH tankless - error codes E0-E9, En, Fd and symptoms walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Furrion F2GWH Tankless Water Heater User Manual (Lippert PN 2022107551)Furrion/Lippert
Related codes
- E9Flame sensed before ignition (buzzer) — board detects flame current…
- EnSystem timer error: water heater has operated continuously for longer…
- FdWater heater operating in Winter Use Mode (freeze protection active)
- E0Water outlet temperature probe failure - an open circuit or short…
- E3ECO open before ignition or during normal operation - the ECO…
- E4Water inlet temperature probe failure - an open circuit or short…
- E5Blower motor failure - no motor signal was detected before ignition…
- E6Over temperature - outlet water temperature exceeded 140 F (60 C) for…
All Water Heater — Tankless error codes · Look up another code