Fogatti error code E8
Wind/air-pressure switch failure (IS7/IS8 Pro - mechanical pressure switch): switch closed when powered for 5 s, or continuously disconnected for 2 s. On the newer DC-fan 9Pro/Ultra (FS10B1S), E8 instead = the fan speed exceeds the current load limit for 5+ s (these models have no wind-pressure switch).
What to check, and in what order, is in the app. A step-by-step flow walks this code with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Fogatti InstaShower 7 Instruction Manual - section 6.1 ERROR CODE table (p.23)Fogatti Living
- Fogatti InstaShower 8 Pro Manual - section 6.1 ERROR CODE table (p.23)Fogatti Living
- Fogatti InstaShower Ultra / 9Pro Owner Manual - section 6.1 Troubleshooting error-code tableFogatti Living
Related codes
- 11Ignition failure (older-firmware display code; equivalent to E1)
- E0Outlet temperature probe fault - probe open or shorted
- E6Over-heating fault - water temperature exceeded 176 degF (80 degC)…
- E7Gas valve fault - main valve opens or shorts / proportional valve…
- E9Proportional gas valve fault - the proportional valve is detected…
- EnWater heater timeout - continuous-use set timer reached
All Water Heater — Tankless error codes · Look up another code