LINKS2 error code Device Offline
A node on the RV-C network is not reporting to the control screen. The OEM first-line response is to check that device's power supply, its RV-C cable, and the network termination resistors.
What to check, and in what order, is in the app. The flow LINKS2 - 'Communication Error' / device offline (RV-C bus) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- RV-C Specification Full Layer (2026-02-20) - sec 2.1.2: 'Both ends of the trunk shall be terminated with a 120 ohm resistor'RV-C / RVIA
- Links2 Smart Control System FAQ / User Manual (incl. OEM troubleshooting checklist)LINKS2
Related codes
- Communication ErrorRV-C communication between the control panel and the control screen…
- Low Voltage AlarmHouse battery voltage has fallen below the system's low-voltage…
All Multiplex Coach Control error codes · Look up another code