Error codes › LP / Propane System › MTI Safe-T-Alert 30 Series › Alternating red/green LED + beep every 25-30 s
MTI Safe-T-Alert 30 Series error code Alternating red/green LED + beep every 25-30 s
MALFUNCTION ALARM (30 series): a fault in the sensor's operation or low battery voltage. The LED flashes red-green and the sounder gives a short beep; the signal table prints BEEP EVERY 25-30 SECONDS. The alarm operates normally down to 8 VDC; lower voltage can activate the malfunction alarm.
What to check, and in what order, is in the app. The flow MTI Safe-T-Alert 20/25/30/40/45/62/65/85 series - alarm and LED signal decoder walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Safe-T-Alert Models 30-441-P and 30-442-P Propane Gas Alarm User's Manual (Manual #304298-10, 2019)MTI Industries, Inc. (Safe-T-Alert)
Related codes
- Steady green LED, no soundNormal operation (30-441-P / 30-442-P): powered and monitoring; no…
- Flashing green LED, no sound (warm-up)Warm-up after power-up: the 30 series cannot detect propane gas or…
- Flashing red LED + constant tonePROPANE ALARM (30 series): the green LED turns red and the audible…
- Red-red-green-green flashing LED + beeps every 25-30 sEND OF LIFE (30 series): the sensor's 5-year service life is over…
- LED off (no light, no sound)No power at the alarm (30 series): faulty wire connection, reverse…