Xantrex Freedom EX 4000 error code 94 (Remote Power Off)
[W] Warning, any mode: a remote power-off command was received. The unit stops inverting or charging immediately and shuts down after five seconds; a master unit signals the other network devices to shut down too.
What to check, and in what order, is in the app. A step-by-step flow walks this code with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Freedom EX 4000 Inverter/Charger with 48VDC-to-12VDC Converter Owner's Guide 975-0999-01-01 Rev F (May 2025)Xantrex LLC
Related codes
- 77 (DC-DC Converter Over Current)[W/F] Warning that becomes a manual fault, DC-DC converter: 12 VDC…
- 78 (Cold Temperature warning and shutdown)[W/F] Warning then shutdown, any mode: internal temperature is…
- 87 / 88 (Fan fatigue warning)[W] Warning, any mode: fan fatigue detected.
- 89 / 90 (Fan lock warning)[W] Warning, any mode: a fan is locked / not turning.
- 95 (Equalization Abort)[W] Warning, shore (AC) mode: equalization terminated abnormally…
- 96 (Cannot Equalize)[W] Warning, shore (AC) mode: equalization was requested for a…
- 97 (Battery Temperature Sensor Shorted)[W] Warning, any mode: the battery temperature sensor (BTS) is…
- E01Low battery cutout (LBCO) shutdown: the 48 V bank stayed below the…