Error codes › Inverters › Xantrex Freedom eGEN › Ring LED lights up every 5 seconds (MAINTENANCE mode)
Xantrex Freedom eGEN error code Ring LED lights up every 5 seconds (MAINTENANCE mode)
The battery is in MAINTENANCE mode (cells disconnected, low idle consumption) - entered by holding the button 3-5 seconds while ON, or automatically after 8 hours in a fault state with no interaction.
What to check, and in what order, is in the app. A step-by-step flow walks this code with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Xantrex Lithium-ion Battery Owner's Guide 975-1044-01-01 Rev L - 310Ah/410Ah 12V, 205Ah 24VXantrex LLC
Related codes
- P:UV (5 fast / 6 slow)Ring LED 5 fast + 6 slow; SOC Gauge P:UV / 'Pack Under Voltage': the…
- Safety Circuit (6 fast / 2 slow)Ring LED 6 fast + 2 slow; SOC Gauge 'Safety Circuit' / safety…
- Battery lock-out (three identical errors in five minutes)The Xantrex 310/410/205 Ah battery locks out on the third occurrence…
- Ring LED: 2 fast flashes then 5 slow flashes on first use (address claim required)On first use the battery LED flashes 2 fast + 5 slow to ask for an…
- Ring LED off-on-off every 0.9 seconds while button held (turning OFF)Holding the pushbutton more than 10 seconds turns the battery OFF…
- None (SOC Gauge: No Fault Present)SOC Gauge fault status 'None': no fault present on the connected…
- Multi FaultsSOC Gauge fault status 'Multi Faults' (LED 2 fast / any slow): listed…
- B:Cell CountSOC Gauge B:Cell Count (3 fast / 3 slow): BMS reported cell count…