Schneider Conext error code F47
DC under-voltage shutdown (immediate) -- DC voltage is below 16 VDC (24 V system) or 32 VDC (48 V system). The fault clears and the inverter restarts when DC voltage reaches VLBCO+2 V (24 V) / VLBCO+4 V (48 V).
What to check, and in what order, is in the app. The flow Coach Electrical — entry diagnostic (converters / inverters / solar / monitors) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Conext XW Inverter/Charger Maintenance (Service) Guide 977-0017-01-01 Rev B (covers XW 6048 / XW 4548 / XW 4024)Schneider Electric
Related codes
- F42Auxiliary power supply (APS) over-voltage shutdown (escalating…
- F44Battery over-temperature shutdown at 60 degC.
- F45Capacitor over-temperature shutdown at 105 degC.
- F46Controller fault.
- F48DC under-voltage shutdown -- DC voltage is below the LBCO (Low…
- F49DC over-voltage shutdown -- DC voltage is above 35 VDC (24 V) or 70…
- F52EEPROM error.
- F53EEPROM error (same as F52).
All Electrical (12V / 120V / Converter / Inverter) error codes · Look up another code