Schneider Conext error code F1
AC output under-voltage shutdown at 108 V -- the inverter shut down to protect the loads (escalating auto-fault: must occur 3 times in 2 minutes to become a manual fault).
What to check, and in what order, is in the app. The flow Coach Electrical — entry diagnostic (converters / inverters / solar / monitors) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Conext XW Inverter/Charger Maintenance (Service) Guide 977-0017-01-01 Rev B (covers XW 6048 / XW 4548 / XW 4024)Schneider Electric
Related codes
- W96Cannot equalize: the selected battery type should not be equalized…
- W97Battery temperature sensor failure: the battery temperature sensor is…
- W500Lost network connection (Xanbus).
- W501Non-volatile memory warning: the inverter/charger is trying to fix a…
- F2AC output over-voltage shutdown at 135 V (escalating auto-fault: 3…
- F17Transfer relay welded: the AC1 L1 transfer relay is bad, or an AC…
- F18Transfer relay welded (AC1 L2 transfer relay bad, or an AC source…
- F19Transfer relay welded (AC2 L1 transfer relay bad, or an AC source…
All Electrical (12V / 120V / Converter / Inverter) error codes · Look up another code