Autoterm / Planar AIR (2D/4D/8D/9D) error code 11
Faulty air temperature sensor (intake) - only for AIR-8D (PU-5: blink count not separately listed)
What to check, and in what order, is in the app. The flow Diesel Air Heater — Won't Start / Lockout (glow vs fuel) walks this code step by step with the pass/fail measurements, wiring schematics and procedures that go with it, and it works offline in the bay.
Start free trial 14 days free, no card neededDocumented in
- Autoterm AIR fault-code table + AIR Repair Manual + PU-5 Operation Manual v2025Autoterm
- Autoterm AIR User's Manual with installation instructions v12.2018-1 (PLANAR series)
Related codes
- 04/06Faulty temperature sensor in the control unit (PU-5: 6 blinks)
- 07Overheat sensor - open circuit (PU-5: blink count not separately…
- 09Faulty glow plug (PU-5: 4 blinks)
- 10Electric motor of the air blower does not develop the necessary speed…
- 12Shut down - overvoltage more than 30V (24V) or more than 16V (12V)…
- 15Shut down - low voltage, less than 20V (24V) or less than 10V (12V)…
- 13The heater does not start - two automatic start attempts failed…
- 16During the purge time, temperature sensor was not cooled down; time…